• 100 Base-T Ethernet Application
  • Meets IEEE 802.3 & ANSI X 3.263 standards
  • Impedance: 100OHMS
  • Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz
    0.1VRMS with 8mA DC Bias
  • Always EU RoHS/ELV Compliant, wave solder capable to 265°C
  • Rise Time: 2.5nano-seconds from 10 to 90 percent
  • RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F
  • Standard operating temp: 0ºC to +70ºC (see footnote)
  • Industrial operating temp: -40ºC to +85ºC (see footnote)
Electrical Specifications @ 25°C
Part
Number
OCL(uH Min)
@100KHz/0.1V
with 8mA DC Bias
Turn Ratio
chip: cable
(±3%)
EMI
Fingers
LED
(L/R)
Insertion Loss
(dB Max)
Return Loss
(dB Min)
0.5-100MHz 0.5-30MHz 30.1-60MHz 60.1-80MHz
AR1009-1326_ 350 1CT:1CT YES G/Y 1.1 18 18-20*LOG(f/30) 12

Electrical Specifications @ 25°C
Part
Number
Cross Talk
(dB Min)
CMRR
(dB Min)
HI-POT
(VDC)
0.5-40MHz 40.1-100MHz 0.5-100MHz
AR1009-1326_ 35 33-20*LOG(f/50) 30 2250

*Complete part number by inserting “S” for Standard Temp. or “I” for Industrial Temp.

All specifications subject to change without notice.

MECHANICAL

Unless otherwise specified all tolerances are: ± 0.25 in mm

SCHEMATICS:

Unless Otherwise Specified all tolerances are: ±0.25mm

Notes
  1. R1-R4=75 Ohms, 1/16W, 5% Resisitors.
  2. C1=1000pF, 2KV Decouping Capacitor.
  3. LED Compliant with IEC60825-1 Safety of Laser Products when operated up to 20mA.
  4. LED Forward Voltage: 2.1V(TYP), LED Power Dissipation: 105mW. LED Peak Wavelength: Green=565nm, Yellow=585Nm

PCB LAYOUT

All Dimensions Tolerances Unless Otherwise Specified are: ±0.05mm

Materials and Finish:
Housing: PBT, Flammability Rating 94V-O.
Shell: C2680 Brass, 025mm thick, 80+150u” nickel plating.
Mod Jack Contact: Phospher Bronze, 0.35mm thick, Gold Plated.
LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads.