- 10/100 Base-T Ethernet Application
- Meets IEEE 802.3 & ANSI X 3.263 standards
- Impedance: 100OHMS
- Transmit open circuit inductance (OCL):
350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias - Always EU RoHS/ELV Compliant, wave solder capable to 265°C
- RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F
- Standard operating temp: 0ºC to +70ºC
| Electrical Specifications @ 25°C | ||||||
|---|---|---|---|---|---|---|
| Part Number |
OCL(uH Min) @ 100kHz, 0.1V |
Turn Ratio chip: cable (±2%) |
Insertion Loss (dB Max) |
Return Loss (dB Min) |
||
| With 8mA DC Bias | 0.5-100MHz | 0.5-30MHz | 30.1-60MHz | 60.1-80MHz | ||
| AR1015-1221S | 350 | 1CT:1CT | 1.1 | 18 | 18-20*log(f/30) | 12 |
| Electrical Specifications @ 25°C | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Part Number |
EMI Fingers |
LED (L/R) |
Cross Talk (dB Min) |
CMRR (dB Min) 0.5-100MHz |
HI-POT (VDC) |
|||||||||||||
| 0.5-40MHz | 40.1-100MHz | |||||||||||||||||
| AR1015-1221S | NO | G/Y | 35 | 33-20*log(f/50) | 30 | 2250 | ||||||||||||
All specifications subject to change without notice.
MECHANICAL
Unless otherwise specified all tolerances are: ±0.25 in mm
SCHEMATICS
Notes:
- R1-R4=75OHMS,1/16W,5%Resistors.
- C1=1000pF,2KV Decouping Capacitor.
- LED Compliant With IEC60825-1 Saftety of Laser Products When operated Up to 20mA.
- LED Forward Voltage: 2.1V(TYP), LED Power Dissipation: 105mW, LED Peak Wavelength: Green=565nm, Yellow=5
PCB LAYOUT
Unless otherwise specified all tolerances are: ±0.05 in mm
MATERIALS
- Housing: PBT, Flammability Rating 94V-O.
- Shell: C2680 Brass, 0.20mm thick, 50u" Min nickel plating.
- Mod Jack Contacts: Phosphor Bronze, 0.35mm thick, 6u" Gold plated.
- LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads.